Tenant fit-out • Kingston, ON • 2024
Large office retrofit / fit-out
Retrofit and fit-out of approximately 30,000 ft²; HVAC and plumbing/drainage systems removed back to their respective mains, with full re-design and coordinated permit documentation.
Gallery
Latest projects
See all projects HVAC retrofit
Air handler and chiller retrofit
Replacement of a 40-ton water-cooled chiller package, a 20,000 CFM air-handling unit, and the condenser water pump—coordinated for minimal downtime and clear commissioning boundaries.
View project
HVAC retrofit
Air handler and chiller retrofit
Replacement of a 40-ton water-cooled chiller package, a 20,000 CFM air-handling unit, and the condenser water pump—coordinated for minimal downtime and clear commissioning boundaries.
Mechanical retrofit
Chiller retrofit — St. Clair West
Replacement of an 800-ton legacy chiller with two magnetic-bearing machines in a primary–secondary loop, with condenser and evaporator pumps upgraded to duty/standby and refrigerant leak detection plus purge exhaust.
View project
Mechanical retrofit
Chiller retrofit — St. Clair West
Replacement of an 800-ton legacy chiller with two magnetic-bearing machines in a primary–secondary loop, with condenser and evaporator pumps upgraded to duty/standby and refrigerant leak detection plus purge exhaust.
Mechanical — speciality fluid systems
Aircraft Hangar Waste Oil Recovery System
This project involved the design and specification of a waste oil recovery system. Major components included a diaphragm pump, level detection with alarm, and a 2,200 L waste oil tank.
View project
Mechanical — speciality fluid systems
Aircraft Hangar Waste Oil Recovery System
This project involved the design and specification of a waste oil recovery system. Major components included a diaphragm pump, level detection with alarm, and a 2,200 L waste oil tank.
